48V DC System
DE-48100-DCP
48V DC System Consists of:
✓ DSP Based High efficiency SMPS FCBC
✓ DSP Based True sine wave Inverter
✓ Lithium Battery bank
✓ AC Distribution Panel for Uninterrupted AC Supply
✓ DC Distribution panel for Uninterrupted DC Supply
✓ SCADA module for communication with external systems
✓ Surge protection
✓ RCCB
✓ DC Earth leakage protection Circuit
✓ See through Glass window for Status monitoring
✓ IP54 Compliant Design
| MODEL | DE-48100-DCP |
|---|---|
| Configuration | |
| BATTERY PACK | 48V 100AH Lithium battery pack |
| FLOAT CUM BOOST CHARGER | SMPS Based Micro controller driven MOSFET Based Float cum Boost Charger, 48V / 10A with all necessary protections |
| INVERTER | 48VDC input, Output: 230V AC, 50Hz, MOSFET based inverter |
| DCDB Compartment | Distribution of DC & AC through required MCBs for loads |
| FLOAT CUM BOOST CHARGER Specifications | |
| Voltage | 48V Nominal |
| Current | 25A |
| Boost Voltage | 56.4V |
| Float Voltage | 52.25V |
| Line & Load Regulation | ± 1% |
| Ripple | < 1% |
| Constant Current Mode | |
| Line & Load Regulation | ± 1% |
| Ripple | < 1% |
| General | |
| Input Voltage | 230V AC ±10%, 1 phase, 50Hz |
| Input Supply protection & Control | MCB |
| Output supply protection &Control | Overload, over-voltage, Short-circuit Protections |
| Indicators | input voltage, output voltage, charging current, mode of operation etc. |
| Float / Boost | Automatic Float and boost operation |
| Stabilization | Output DC supply will be stable against variations in input mains AC supply. |
| Cabinet | Charger housed in a cabinet with suitable output terminals. |
| Dimensions | W : 1200mm x 800mm D x 1600mm H (Approx) |
| Operating Temperature | 0ºC to + 55 ºC |
| Weight | Approx. 250kgs |