900W DC Electronic Load Bank

DE-ELB-900WDC


Salient Features

  • High Performance ARM Cortex™-M3 32-bit Micro controller

  • Very useful for simulation testing of missile electronics

  • Suitable for Battery Discharger, SMPS Tester, Power Supply Tester, Solar Panel Tester

  • Voltage range :5V to 30V

  • Load capacity up to 30A or 900W

  • Mode of operation: Constant Current

  • Display: Digital Panel meter for Current and Voltage

  • Set Current: Through front panel multi turn potentiometer

  • Cooling: Forced air cooling

  • Protections: Reverse polarity

  • Indications: Mains, Source Connected, Source Reverse and Load ON


MODEL DE-ELB-900WDC
Technical Specification
parameters
voltage 5V-30V
Load current Range 0-30A
Power rating 900W
Peak power 950W
Modes of operation
Constant current mode 0-30A
Constant power mode 0-900W
Constant current mode
Current Range 0-30A
Current Resolution 100mA
Current Accuracy ±0.1%
Constant power mode
Power Range 0-900W
Power Resolution 10W
Power Accuracy ±0.5W
Programmable parameters
Test Duration 0-120minutes
Time (min Load Pulse) 10mSec
Time( Max Load Pulse) 120 Minutes
No. of Load Pulses Min 1, Max 600
Load Realization time >0.5mSec
Data Acquisition parameters
Voltage Reading 0-30V
Voltage Resolution 0.01V
Voltage measurement accuracy ±0.1%(FS)
Current Reading 0-30A
Current Resolution 0.1A
Current Accuracy ±0.25%(FS)
Power Reading 0-900W
Power resolution 10W
Power Accuracy ±0.1%(FS)
Data Acquisition Sampling Rate
Meters
Voltage 4 ½ Digit VoltMeter
Current 4 ½ Digit Ammeter
Indications
Mains ON
Source Connected
Source Reverse
Test in Progress
Test Over
Test Termination Methods
By time S/W configurable
By End Voltage S/W configurable
Forced Termination S/W configurable
Emergency Cut off Circuit Breaker
Protections
Over Voltage
Over Current
Over power
Reverse polarity
Over temperature
Interface
Analog Interface External RS-232, RS-485, USB
0-5V for current(switchable)
0-5V for power(switchable)
Cooling Forced air cooling
Output Terminals Heavy Duty copper terminal